Euclid Wiring to Duet3 Hardware

RAMPS Controller Commissioning

MEGA/RAMPS mainboard can use either the standard 5V or 24V Euclid models. Wire Euclid Probe to any open endstop connector.

RAMPS Mainboard Wiring Diagram

MKS_BASE Commissioning

MKS_BASE mainboard can use either the standard 5V or 24V Euclid models. Wire Euclid Probe to any open endstop connector.

MKS_BASE 1.6 Wiring Diagram

Panucatt ReARM Commissioning

ReARM mainboard can use either the standard 5V or 24V Euclid models. Wire Euclid Probe to any open endstop connector.

ReARM Mainboard Wiring Diagram

Fystec Spider Commissioning

Fystec Spider mainboard can use either the standard 5V or 24V Euclid models depending on the application. Wire Euclid Probe to any open endstop connector or to the probe connector.

Wiring to the probe connector via a toolboard requres coordination- do not wire multiple BAT85 diodes in series.

Fystec Spider Wiring Diagram as endstop

Fystec Spider Wiring Diagram to toolboard